Rabu, 10 Mei 2017

BOM NUKLIR / NUCLEAR BOMB / قنبلة نووية



Setelah kami mendapatkan informasi-informasi tentang Bom Nuklir baik dari media cetak maupun elektronik,kami tertarik untuk membahas nya.
langsung saja simak pembahasannya berikut:

*SEJARAH BOM NUKLIR
Ledakan Nuklir terjadi karena pelepasan energi yang terus menerus dari sebuah reaksi nuklir yang terjadi secara cepat. Ledakan nuklir yang paling kita kenal sejak mulai Pelajaran Sejarah dari mulai SD adalah Bom Atom (Nuklir) Hiroshima dan Nagasaki. Bom tersebut diciptakan oleh Amerika yang fungsinya untuk menghancurkan sebuah kota seperti yang terjadi di Hirosima dan Nagasaki . Sebulan sebelum PD II pecah, tepatnya 2 Agustus 1939, ilmuwan besar Albert Einstein mengirim surat kepada Presiden AS Franklin Delano Roosevelt. Dalam suratnya Einstein mengabarkan bahwa Nazi Jerman tengah giat memurnikan uranium-235 dan kemungkinan akan mengembangkan penemuan baru ini menjadi bom atom yang sangat spektakuler. Bom berbahan bakar zat radioaktif ini belum pernah dibuat dimanapun. Kekuatannya yang berjuta-juta kali lipat bahan peledak konvensional trinitro toluena (TNT) bisa menghancurkan kota dalam hitungan detik. Einstein menambahkan, pemerintah mantan negerinya itu secara diam-diam mulai menghentikan penjualan Uranium dari Cekoslovakia (dahulu) dan mengambil alih tambang-tambangnya. Menyiasati hal ini, menurut Einstein, semestinya Amerika bisa mendahului pengembangan bom nuklir sebelum Jerman melakukannya. Tidak lama setelah surat Einstein diterima presiden, AS segera menggelar suatu proyek rahasia bersandi “Project Manhattan”. Seratus ribu orang dipekerjakan dalam pabrik-pabrik yang dibangun di Hanford, Washington, Oak Ridge, Tennese, dan di laboratorium utama di Los Alamos, New Mexico seluas 20.000 hektar. Banyak pekerja tidak diberitahu perihal apa yang mereka kerjakan. Insinyur-insinyur penting mungkin mengerti maksud Project Manhattan, namun mereka lebih memilih bekerja tanpa banyak bicara dibawah pengawasan penuh J. Robert Oppenheimer, seorang ahli fisika nuklir.

Memisahkan isotop uranium-235 yang ada di alam bukan perkara mudah dalam hal ini. Apalagi sebagian besar terdiri atas isotop uranium dengan nomor massa 238 (U-238). Kadar U-235 sendiri di alam jumlahnya tidak lebih dari satu persen uranium metalnya. Padahal, kadar uranium di dalam batuan alam pun hanya 0,7 persen saja. Untuk inilah, konon AS mem-budget-kan biaya sebesar dua milyar dollar untuk penelitian dan penciptaan bom atom antara 1939-1945. Enam tahun kemudian, kerja keras itu terwujud. Little Boy seberat 4,5 ton dijatuhkan di atas Hiroshima pada 6 Agustus 1945. Bom uranium-235 ini membuat cendawan debu hingga ketinggian 45.000 kaki dengan ledakan dahsyat berantai, kilatan, api, dan gelombang kejut berkecepatan 1.100 kaki perdetik. Belum lagi efek ledakan ini menimbulkan hembusan angin berkecepatan ratusan mil perjam hingga radius puluhan mil. Sebanyak 137.000 nyawa tergulung dalam hitungan detik. Begitupun gedung-gedung, jembatan, dan semua instalasi, hancur tak bersisa
.

Selang tiga hari kemudian, bom kedua dijatuhkan AS di Nagasaki. Kali ini 78.000 rakyat menjadi santapan Fat Man, yakni bom atom bermuatan plutonium-239. PD II pun berakhir dengan berletutnya Jepang kepada Sekutu. Namun lebih daripada itu, dunia telah menyaksikan suatu kebiadaban dari penemuan baru para ilmuwan fisika yang sulit diterima akal. Tragedi hitam di Jepang pada 6 dan 9 Agustus itu, diakui atau tidak, kemudian membawa dunia masuk kedalam lorong persaingan membuat nuklir pemusnah. Perjanjian pencegahan dan pengurangan senjata nuklir dunia tahun 1972 yang terus digembar-geborkan AS ibarat tak mendapat hirauan. Lagipula, siapa bisa menjamin, konflik peperangan tidak akan membuat balistik-balistik nuklir yang telah bertebaran di banyak negara itu diluncurkan? Bahkan oleh AS sekalipun! Menurut sebuah sumber penelitian yang dikeluarkan di Prancis April 2002, kini di dunia sedikitnya terdapat 1.400 reaktor nuklir yang dibangun sejak 1954. Dan lihatlah, 57 persennya digunakan untuk kepentingan sistem penyerangan/pertahanan militer. Jumlah itu terdapat antara lain dalam 220 kapal selam peluncur rudal, 250 kapal serang, 10 kapal induk, dan 14 kapal jelajah. Sebanyak 245 reaktor nuklir terapung dimiliki AS, Inggris, Prancis, Cina, dan Rusia di dalam 182 kapal perang. Digarisbawahi, dunia seharusnya prihatin akan keamanan kapal-kapal selam nuklir Rusia. Tragedi Chernobyl, April 1986, di Soviet (Ukraina) setidaknya menjadi catatan sendiri. Tetapi, keprihatinan serupa juga dinyatakan bagi keamanan penyimpanan maupun perawatan limbah nuklir AS, Inggris, dan Prancis.

Pembelahan inti Penciptaan energi nuklir menarik untuk dikaji. Terlebih sejak empat ilmuwan Jerman, yakni Otto Hahn, Lise Meitner, Fritz Strassman, dan Otto Frisch menemukan pertamakali tahun 1939, bahwa inti atom berat (radioaktif) bisa dibelah dengan menembakkan sebuah netron. Netron dipilih karena zarah ini tidak bermuatan. Sehingga tidak akan menimbulkan gaya tolak coulomb terhadap inti-inti atom bermuatan positif, proton. Reaksi pembelahan (fisi) sebuah inti akan menghasilkan rata-rata 2,5 netron dan beberapa inti baru. Pada bom atom, reaksi pembelahan ini akan terus berantai tidak terkendali karena netron baru tidak dicegah untuk menumbuk inti-inti yang telah dihasilkan. Yang sangat bahaya, karena dalam setiap pembelahan inti akan terjadi pelepasan energi yang besar. Contohnya, pada pembelahan satu inti uranium dilepaskan energi sebesar 208 MeV. Satu MeV setara dengan energi listrik 4,45 x 10-20 kWh. Itu baru untuk satu nuklida (inti atom). Coba bayangkan betapa besarnya energi yang dilepaskan oleh pembelahan inti satu kilogram uranium. Energinya akan mencapai 2,37 x 107 kWh. Bila energi ini digunakan untuk menghidupkan bola lampu 100 W, maka bola lampu itu akan terus menyala tanpa henti selama 30.000 tahun! Lain halnya bila dihitung dalam kalori, energi pembelahan satu kilogram U-235 adalah 25,5 juta kilogram kalori. Bandingkan dengan pembakaran satu kilogram karbon yang hanya menghasilkan 8,5 kalori. Bila menilik ukuran atom, mungkin kita sulit percaya. Sebuah nuklida (yang tersusun oleh proton-proton dan netron) ukurannya berada dalam orde 10-15 meter. Untuk membuat bayangan sederhana, baiklah ukuran inti atom kita perbesar seukuran kelereng. Maka, bila kita tempatkan kelereng itu di tengah lapangan sepak bola, itulah gambaran nuklida di dalam atom. Sungguh kecil. Namun demikian, inti atom ternyata mengandung lebih dari 99,9 persen massa atomnya, atau setara dengan 1.800 kali massa sebuah orbitalnya, elektron. Selebihnya atom merupakan ruangan kosong. Menakjubkan! Bom nuklir atau bom atom, sebenarnya tidak hanya bisa diciptakan melalui reaksi fisi. Para ahli kemudian mencoba membuat bom Hidrogen dengan cara melakukan penggabungan (fusi) inti-inti ringan deuterium (H2) dan tritium (H3). Dua inti bernomor atom kecil ini bila digabungkan akan membentuk helium (He-4) sambil membebaskan energi yang besar. Namun demikian, penyatuan dua nuklida tentu tidak mudah. Dibutuhkan energi yang sangat besar sebelumnya untuk melawan gaya tolak Coulomb. Artinya, untuk mendapatkan kelajuan inti yang sangat cepat agar bertumbukan, dibutuhkan suhu tinggi hingga ratusan juta Kelvin. Dengan kata lain, reaksi fusi harus didahului dengan fisi. Sehingga reaksi ini disebut reaksi termonuklir atau reaksi bertingkat, fisi dan fusi. Dengan demikian, bom hidrogen memiliki kekuatan lebih besar lagi dari bom atom. Maret 1954, AS telah mengujicoba bom hidrogen pertama bernama “Bravo” di Atol Bikini, Kepulauan Marshal, Samudera Pasifik. Bravo berkekuatan 10 megaton TNT atau kira-kira 700 kali energi bom atom Little Boy! Alhasil, jutaan ton pasir, batu karang, tumbuhan, dan fauna laut dalam radius 20 mil beterbangan membentuk cendawan raksasa membakar langit. Mengerikan, tiga Atol Bikini, yakni Bokonijien, Aerokojlol, dan Nam, tidak terlihat lagi di atas permukaan air.

*CARA KERJA BOM NUKLIR
Reaksi nuklir terjadi ketika neutron ditembakkan dari jarak dekat ke arah sekumpulan atom mengandung nuclei (termasuk uranium dan plutonium). Saat bersentuhan dengan neutron, nuclei akan terpecah dan berubah menjadi bagian-bagian yang lebih kecil atau ringan. Saat proses ini terjadi, serangkaian reaksi nuklir dimulai. Karena atom mengandung neutron, akan terdapat lebih banyak neutron yang bergerak bebas dan mengenai atom-atom lain yang masih utuh. Proses ini disebut fission dan terus terjadi sehingga nuclei bisa terus terpecah. Salah satu kunci penting adalah fission mampu memecah atom tanpa sumber energi lain; reaksi kimia terjadi secara alami. Pemecahan atom menghasilkan energi, sekitar 80 terajoule per kilogram (TJ/kg).

Bom atom jenis lama memulai reaksi nulkir berantai dengan cara saling menembakkan beberapa isotop uranium (atom uranium dengan jumlah proton sama, tapi jumlah neutron berbeda) di sebuah ruang kecil di dalam tubuh bom. Pada jenis lebih baru, inti bom dikelilingi oleh alat berdaya ledak tinggi disebut explosive lens atau lenses; alat ini berfungsi untuk memisahkan atau mengumpulkan elektron. Karena keberadaan lenses, inti bom akan terpecah dan memulai reaksi nuklir berantai. Reaksi pemecahan terus berlangsung sampai semua nuclei terpecah.

*BAHAN UNTUK MEMBUAT BOM NUKLIR
Untuk membuat bom nuklir dibutuhkan bahan-bahan inti yang dibagi menjadi 3, yaitu Fisil, Bahan Fussionabel dan Material Source. Berikut adalah bahan untuk membuat bom nuklir:

1. Fisil, bahan fisil adalah material yang terdiri dari atom-atom yang dapat dibagi oleh neutron dalam reaksi berantai-mandiri untuk melepaskan energi, yang termasuk dalam bahan tipe fisil ini adalah plutonium dan uranium.

2. Bahan Fussionabel, adalah bahan di mana atom dapat menyatu untuk melepaskan energi, dan yang termasuk dalam bahan tipe ini adalah deuterium dan tritium.

3. Material Source, adalah bahan yang digunakan untuk meningkatkan senjata nuklir dengan menyediakan sumber partikel atom tambahan untuk fisi. Bahan yang termasuk adalah tritium, polonium, berilium, lithium-6 dan helium-3.

Demikian penjelasan singkat tentang bom nuklir sebagai pengetahuan anda tentang senjata-senjata terdahsyat di dunia ini.










English:
Once we get the information about the nuclear bomb from both print and electronic media, we are interested in discussing her.
go see the following discussion:

* HISTORY OF NUCLEAR BOMB
Nuclear explosion occurred due to continuous release of energy from a nuclear reaction that happens quickly. Nuclear explosions are the most familiar since the start of the History Lessons begin SD is an atomic bomb (Nuclear) Hiroshima and Nagasaki. The bomb was invented by the Americans whose function is to destroy a city as happened in Hiroshima and Nagasaki. A month before World War II broke out, precisely August 2nd, 1939, the great scientist Albert Einstein sent a letter to the US President Franklin Delano Roosevelt. In his letter, Einstein reported that Nazi Germany keen to purify uranium-235 and is likely to develop this new invention into a very spectacular atomic bomb. Fueled bomb radioactive material has never been made anywhere. Its strength is that millions of times over conventional explosives trinitro toluene (TNT) could destroy the city in a matter of seconds. Einstein added, the country's former government secretly began to stop the sale of uranium from Czechoslovakia (formerly) and took over the mine-mine. Around this, according to Einstein, should Americans can precede the development of a nuclear bomb before the Germans did. Not long after Einstein's letter received by the president, the US immediately held a secret project codenamed "Manhattan Project". One hundred thousand people are employed in factories built in Hanford, Washington, Oak Ridge, of Tennessee, and in the main laboratory in Los Alamos, New Mexico 20,000 hectares. Many workers are not informed about what they are doing. Engineers importantly perhaps understand the meaning of the Manhattan Project, but they prefer to work in silence under the full supervision of J. Robert Oppenheimer, a nuclear physicist.

Separating the uranium-235 isotope existing in nature is not easy in this regard. Moreover, largely made up of the uranium isotope with mass number 238 (U-238). Levels of U-235 alone in nature are not more than one percent of the metal uranium. In fact, levels of uranium in the rock universe was only 0.7 percent. For this, it seems US-kan mem-budget cost of two billion dollars for research and the creation of the atomic bomb between 1939-1945. Six years later, the hard work was realized. Little Boy weighing 4.5 tons dropped on Hiroshima on August 6, 1945. The bomb uranium-235 is made plume of dust to a height of 45,000 feet with the explosion of a chain, a flash of fire, and the shock wave speed of 1,100 feet per second. Not to mention the effects of this explosion cause gusts of winds hundreds of miles an hour to a radius of tens of miles. As many as 137 000 lives rolled up in a matter of seconds. Likewise, buildings, bridges, and all installations, destroyed no trace
.

Two days later, the US dropped a second bomb on Nagasaki. This time 78,000 people into bite Fat Man, the atomic bomb loaded with plutonium-239. World War II came to an end with berletutnya Japan to the Allies. But more than that, the world has witnessed the savagery of new discoveries scientists make sense of difficult physics. Tragedy in Japan on August 6 and 9, it is recognized or not, then bring the world into the lane competition make nuclear destruction. Agreement prevention and reduction of nuclear weapons the world in 1972, which continues blown out like the US geborkan not get forgotten. After all, who can guarantee, will not create a conflict of war-nuclear ballistic ballistics that have been scattered in many countries it was launched? Even though the US! According to a source of research issued in April 2002 France, now in the world there are at least 1400 nuclear reactor built since 1954. behold, 57 percent is used for the benefit of the attack / defense military. The amount is available among others in 220 submarine missile launchers, attacked 250 ships, 10 ships and 14 cruise ships. A total of 245 nuclear power reactors owned by the US, Britain, France, China and Russia in a 182 warships. Underlined, the world should be concerned about the safety of nuclear submarines of Russia. The tragedy of Chernobyl, April 1986, in the Soviet (Ukraine) at least into the records themselves. But, also expressed a similar concern for the security of the storage and treatment of nuclear waste the US, Britain, and France.

The creation of nuclear division nuclear energy interesting to study. Especially since four German scientists, namely Otto Hahn, Lise Meitner, Fritz Strassman and Otto Frisch discovered first in 1939, that the nuclei of heavy atoms (radioactive) can be cleaved by firing a neutron. Neutrons have been selected for this particle has no charge. So it will not be repulsive coulomb against nuclei positively charged protons. Cleavage reaction (fission) a core will produce an average of 2.5 neutrons and some new core. At the atomic bomb, this cleavage reaction will continue uncontrolled chain for new neutrons are not prevented from mashing nuclei have been generated. Which is very dangerous, because in each division core emission of energy. For example, the division of the nucleus of uranium released energy of 208 MeV. One MeV energy equivalent of 4.45 x 10-20 kWh of electricity. That's just for one nuclide (nuclei). Just imagine how much energy is released by cleavage core of one kilogram of uranium. Its energy will reach 2.37 x 107 kWh. When this energy is used to turn on the light bulb 100 W, then the bulb will remain lit continuously for 30,000 years! Another case when calculated in calories, the energy division of one kilogram of U-235 was 25.5 million kilogram calories. Compare with burning one kilogram of carbon which produces only 8.5 calories. When you view the size of an atom, we might be difficult to believe. A nuclide (composed of protons and neutrons) in size are in the order of 10-15 meters. To make a simple shadow, let us expand the size of an atomic nucleus the size of marbles. So, if we put marbles in the middle of the football field, that's the picture of nuclides in the atom. Really small. However, the nuclei of atoms it contains more than 99.9 percent of the mass of the atom, or the equivalent of 1,800 times the mass of an orbital, the electron. The rest of an atom is empty space. Amazing! Nuclear bomb or atomic bomb, in fact not only produced through fission. The experts then tried to make the hydrogen bomb by way of merger (fusion) lighter nuclei of deuterium (H2) and tritium (H3). Two small atom's nucleus numbered when combined will form helium (He-4) while freeing energy. However, the unification of the two nuclides is certainly not easy. It takes enormous energy previously against the Coulomb repulsion. That is, to get a core speed very quickly to collide, it takes high temperatures of up to hundreds of millions of Kelvin. In other words, a fusion reaction must be preceded by fission. So that this reaction is called thermonuclear reaction or reaction storey, fission and fusion. Thus, the hydrogen bomb have even greater strength than the atomic bomb. March 1954, the US has tested the first hydrogen bomb named "Bravo" at Bikini Atoll, Marshall Islands in the Pacific Ocean. Bravo measuring 10 megatons of TNT, or about 700 times the energy of an atomic bomb Little Boy! As a result, millions of tons of sand, rocks, plants, and marine fauna within a 20 mile radius formed a giant mushroom fly burning sky. Terrible, three Bikini Atoll, namely Bokonijien, Aerokojlol, and Nam, no longer visible in the water.

* HOW THE NUCLEAR BOMB
Nuclear reactions occur when a neutron is fired from close range in the direction of a collection of atoms containing nuclei (including uranium and plutonium). When in contact with neutrons, nuclei will split and turned into pieces smaller or lighter. As this process occurs, a series of nuclear reactions begin. Because the atom contains neutrons, there will be more free-moving neutrons and the other atoms that are still intact. This process is called fission and continues to occur so that nuclei could continue to split. One of the key is able to break atomic fission without other energy sources; chemical reactions occur naturally. Splitting the atom produces energy, about 80 terajoule per kilogram (TJ / kg).

The atomic bomb nulkir kind of long start chain reaction through mutual fired several isotopes of uranium (uranium atoms with the same number of protons, but different numbers of neutrons) in a small space inside the body of the bomb. In the newer types, bomb core surrounded by means of a high explosive called explosive lens or lenses; This tool serves to separate or collect electrons. Due to the existence of lenses, bomb core will be split and start a nuclear chain reaction. Splitting reaction continues until all nuclei split.

* MATERIALS TO MAKE A NUCLEAR BOMB
Needed to make a nuclear bomb core materials are divided into three, that is fissile, Fussionabel Materials and Material Source. Here are the ingredients for making a nuclear bomb:

1. fissile, fissile material is a material composed of atoms can be split by neutrons in a chain reaction-independently to release energy, which is included in the type of fissile material is plutonium and uranium.

2. Material Fussionabel, are materials in which the atoms can be fused to release energy, and which are included in this type of material is deuterium and tritium.

3. Material Source, is a material that is used to increase the nuclear weapon by providing additional resources for the fission of atomic particles. Materials included are tritium, polonium, beryllium, lithium-6 and helium-3.

Thus a brief explanation about the nuclear bomb as your knowledge of the most powerful weapons in the world.










العربية:

بمجرد ان نحصل على معلومات حول القنبلة النووية من المطبوعة ووسائل الإعلام الإلكترونية، ونحن مهتمون في مناقشة لها.
الذهاب لرؤية المناقشة التالية:

* HISTORY OF القنبلة النووية
وقع انفجار نووي بسبب إطلاق مستمر للطاقة من التفاعل النووي الذي يحدث بسرعة. التفجيرات النووية هي أكثر دراية منذ بداية الدروس التاريخ تبدأ SD هو القنبلة الذرية (النووية) هيروشيما وناغازاكي. اخترع القنبلة من قبل الأميركيين الذي تتمثل مهمته في تدمير المدينة كما حدث في هيروشيما وناغازاكي. وقبل شهر من الحرب العالمية الثانية اندلعت، 2 أغسطس بالتحديد عام 1939، والعالم الكبير ألبرت أينشتاين بعث برسالة إلى الرئيس الأمريكي فرانكلين ديلانو روزفلت. في رسالته، ذكرت أينشتاين أن ألمانيا النازية حريصة على تنقية اليورانيوم 235، وهو عرضة لتطوير هذا الاختراع الجديد إلى قنبلة ذرية مذهلة جدا. لم يكن جعلت قنبلة تغذيه المواد المشعة في أي مكان. قوتها هي أن ملايين المرات على التولوين المتفجرات التقليدية trinitro (TNT) يمكن أن تدمر المدينة في بضع ثوان. وأضاف آينشتاين، بدأ الحكومة السابقة في البلاد سرا لوقف بيع اليورانيوم من تشيكوسلوفاكيا (سابقا) وتولى الألغام الألغام. حول هذا، وفقا لآينشتاين، يجب على الأمريكيين أن تسبق تطوير قنبلة نووية قبل فعل الألمان. بعد فترة ليست طويلة إلكتروني آينشتاين تلقى من قبل الرئيس، عقدت الولايات المتحدة على الفور مشروع سري يطلق عليها اسم "مشروع مانهاتن". ويعمل مائة ألف شخص في المصانع التي بنيت في هانفورد، واشنطن، أوك ريدج، تينيسي، وفي المختبر الرئيسي في لوس ألاموس، نيو مكسيكو 20000 هكتار. لا أبلغ العديد من العمال حول ما يقومون به. المهندسين الأهم ربما فهم معنى مشروع مانهاتن، لكنها تفضل العمل في صمت تحت إشراف كامل من J. روبرت أوبنهايمر، وهو فيزيائي نووي.

فصل النظائر من اليورانيوم 235 في الطبيعة ليس من السهل في هذه الحالة. وعلاوة على ذلك، قدم معظمها من نظير اليورانيوم مع عدد كتلة 238 (U-238). مستويات U-235 وحده في الطبيعة ليست أكثر من واحد في المئة من معدن اليورانيوم. في الواقع، كانت مستويات من اليورانيوم في الكون الصخور في المئة فقط 0.7. لهذا، يبدو التكلفة الولايات المتحدة اساسه ذاكرة الميزانية من ملياري دولار للأبحاث وخلق القنبلة الذرية بين 1939-1945. بعد ست سنوات، كان من العمل الشاق. انخفض ليتل بوي وزنها 4.5 طن على هيروشيما في 6 أغسطس 1945. ويتكون قنبلة اليورانيوم 235 عمود من الغبار على ارتفاع 45000 قدم مع انفجار سلسلة، ومضة من النار، وسرعة موجة الصدمة من 1100 قدم في الثانية. ناهيك عن آثار هذا الانفجار تسبب هبوب الرياح مئات الكيلومترات في الساعة إلى دائرة نصف قطرها عشرات الكيلومترات. توالت ما يصل إلى 137 000 ترقى في بضع ثوان. وبالمثل، والمباني والجسور، وجميع المنشآت، تدمير أي أثر
.

بعد ذلك بيومين، ألقت الولايات المتحدة قنبلة ثانية على مدينة ناغازاكي. هذه المرة 78،000 شخص إلى لدغة فات مان، القنبلة الذرية محملة البلوتونيوم 239. جاء الحرب العالمية الثانية إلى نهاية مع berletutnya اليابان لقوات الحلفاء. بل أكثر من ذلك، شهد العالم وحشية من العلماء الاكتشافات الجديدة تجعل الشعور الفيزياء صعب. مأساة في اليابان يوم 6 أغسطس و 9، فمن المسلم به أم لا، ثم جلب العالم إلى المنافسة حارة جعل الدمار النووي. الوقاية من الاتفاق وتخفيض الأسلحة النووية في العالم في عام 1972، والذي لا يزال في مهب بها مثل الولايات المتحدة لن geborkan الحصول على نسيان. بعد كل شيء، من يستطيع أن يضمن، لن يخلق الصراع من المقذوفات النووية الحرب البالستية التي تم المنتشرة في العديد من البلدان إطلاقه؟ على الرغم من أن الولايات المتحدة! ووفقا لمصدر في الأبحاث الفرنسية صدر أبريل 2002، وهناك الآن تم بناء ما لا يقل عن 1400 من المفاعلات النووية في العالم منذ عام 1954. وانظر، وتستخدم 57 في المئة لصالح الهجوم العسكري / الدفاع. والمبلغ هو متاح من بين آخرين في 220 قاذفات صواريخ الغواصات، هاجم 250 سفينة و 10 سفينة و 14 السفن السياحية. ما مجموعه 245 مفاعلات الطاقة النووية التي تمتلكها الولايات المتحدة وبريطانيا وفرنسا والصين وروسيا في 182 السفن الحربية. المسطر، ينبغي أن يكون العالم تشعر بالقلق إزاء سلامة غواصات نووية من روسيا. مأساة تشيرنوبل، أبريل 1986، في الاتحاد السوفياتي (أوكرانيا) على الأقل في سجلات أنفسهم. ولكن، أعرب أيضا عن قلق مماثل لأمن تخزين ومعالجة النفايات النووية في الولايات المتحدة وبريطانيا وفرنسا.

إنشاء الطاقة النووية تقسيم النووي المثير للاهتمام أن دراسة. اكتشف خصوصا منذ أربعة العلماء الألمان، وهما أوتو هان، ليز مايتنر، فريتز ستراسمان وأوتو فريش لأول مرة في عام 1939، أن نوى الذرات الثقيلة (المشعة) يمكن المشقوق بإطلاق النيوترونات. وقد تم اختيار النيوترونات لهذا الجسيم له أي تهمة. لذلك لن يكون كولوم مثير للاشمئزاز ضد أنوية بروتونات موجبة الشحنة. رد فعل الانقسام (الانشطار) ونواة تنتج ما معدله 2.5 النيوترونات وبعض الأساسي الجديد. في القنبلة الذرية، وسوف يستمر هذا التفاعل انشقاق سلسلة غير المنضبط لعدم يمنعون النيوترونات جديدة من يهرس نوى تم إنشاؤها. وهو خطير جدا، لأنه في كل الانبعاثات تقسيم الأساسية من الطاقة. على سبيل المثال، تقسيم نواة اليورانيوم الإفراج عن الطاقة من 208 إلكترون فولت. واحد إلكترون فولت أي ما يعادل الطاقة من 4.45 س 10-20 كيلو واط من الكهرباء. هذا فقط لنوية (نوى). ولكم أن تتخيلوا مقدار الطاقة الصادرة عن جوهر الانقسام كيلوغرام واحد من اليورانيوم. سوف الطاقة تصل إلى 2.37 س 107 كيلو واط ساعة. عند استخدام هذه الطاقة لتشغيل المصباح الكهربائي 100 W، ثم لمبة ستبقى مضاءة بشكل مستمر ل30،000 سنة! قضية أخرى عند حسابها في السعرات الحرارية، وكان قسم الطاقة من كيلوغرام واحد من U-235 25500000 السعرات الحرارية كيلوغرام. مقارنة مع حرق كيلوغرام واحد من الكربون التي تنتج فقط 8.5 سعرة حرارية. عندما تقوم بعرض حجم ذرة، فإننا قد يكون من الصعب أن نعتقد. A نوية (التي تتألف من بروتونات ونيوترونات) في حجم هي في حدود 10-15 متر. لجعل الظل بسيط، دعونا توسيع حجم نواة الذرة حجم الرخام. لذلك، إذا وضعنا الرخام في منتصف ملعب لكرة القدم، وهذا هو صورة من النويدات في الذرة. صغير حقا. ومع ذلك، فإن نوى ذرات أنه يحتوي على أكثر من 99.9 في المئة من كتلة ذرة، أو ما يعادل 1800 مرة من كتلة والمداري، والإلكترون. ما تبقى من ذرة هي المساحة الفارغة. مدهش! قنبلة نووية أو قنبلة ذرية، في الواقع لم تسفر إلا عن طريق الانشطار. ثم حاول الخبراء لجعل القنبلة الهيدروجينية عن طريق الاندماج (الانصهار) نوى أخف من الديوتيريوم (H2) والتريتيوم (H3). نواة اثنين ذرة صغيرة في مرقمة عندما يقترن ستشكل الهليوم (و-4)، في حين الافراج عن الطاقة. ومع ذلك، فإن توحيد النويدات اثنين هي بالتأكيد ليست سهلة. يستغرق طاقة هائلة في السابق ضد تنافر كولومب. وهذا هو، للحصول على سرعات الأساسية سريعة جدا يصطدم، فإنه يأخذ درجات حرارة عالية تصل إلى مئات الملايين من كلفن. وبعبارة أخرى، يجب أن يسبق رد فعل الانصهار بواسطة الانشطار. ذلك أن هذا رد فعل يسمى رد فعل نووية أو رد فعل طوابق، الانشطار والاندماج. وهكذا، فإن القنبلة الهيدروجينية لها قوة أكبر من القنبلة الذرية. مارس 1954، فإن الولايات المتحدة قد اختبرت أول قنبلة هيدروجينية المسمى "برافو" في بيكيني أتول، جزر مارشال في المحيط الهادي. برافو قياس 10 ميغاطن من مادة تي ان تي، أو حوالي 700 مرة طاقة القنبلة الذرية ليتل بوي! ونتيجة لذلك، ملايين الأطنان من الرمال والصخور والنباتات والحيوانات البحرية داخل دائرة نصف قطرها 20 ميل شكلت الفطر ذبابة حرق السماء العملاقة. رهيب، ثلاثة بيكيني أتول، وهي Bokonijien، Aerokojlol، ونام، لم تعد مرئية في الماء.

* كيف القنبلة الذرية
تحدث التفاعلات النووية عندما يتم تشغيل النيوترون من مسافة قريبة في اتجاه مجموعة من الذرات تحتوي على نواة (بما في ذلك اليورانيوم والبلوتونيوم). عندما تكون في اتصال مع النيوترونات، فإن نوى تقسيم وتحولت إلى قطع أصغر أو أخف وزنا. كما تحدث هذه العملية، سلسلة من التفاعلات النووية تبدأ. لأن ذرة تحتوي على النيوترونات، سيكون هناك المزيد من النيوترونات حرة الحركة وغيرها من الذرات التي لا تزال على حالها. وتسمى هذه العملية الانشطار ومازالت تحدث حتى نواة يمكن أن يستمر لتقسيم. واحدة من المفتاح غير قادرة على كسر الانشطار الذري دون مصادر الطاقة الأخرى. تحدث تفاعلات كيميائية طبيعية. انشطار الذرة تنتج الطاقة، ونحو 80 terajoule للكيلوغرام الواحد (TJ / كغ).

وnulkir قنبلة ذرية نوع من بدء سلسلة من ردود الفعل منذ فترة طويلة من خلال المتبادلة عدة نظائر أطلقت من اليورانيوم (ذرات اليورانيوم مع نفس العدد من البروتونات ولكن بعدد مختلف من النيوترونات) في مساحة صغيرة داخل الجسم من القنبلة. في أنواع أحدث والأساسية قنبلة محاطة طريق شديدة الانفجار يسمى العدسة المتفجرة أو العدسات. تعمل هذه الأداة لفصل أو جمع الإلكترونات. بسبب وجود العدسات، وسوف يكون قنبلة الأساسية انقسام وتبدأ سلسلة من ردود الفعل النووي. يستمر رد الفعل تقسيم حتى عن الانقسام النوى.

* المواد اللازمة لصنع قنبلة نووية
اللازمة لصنع قنبلة نووية وتنقسم المواد الأساسية إلى ثلاثة، وهذا هو الانشطارية، مواد Fussionabel والمواد المصدر. هنا هي المكونات اللازمة لصنع قنبلة نووية

1. الانشطارية، المواد الانشطارية هو مادة تتكون من ذرات يمكن تقسيم بواسطة النيوترونات في سلسلة من ردود الفعل بشكل مستقل لإطلاق الطاقة، والتي يتم تضمينها في نوع من المواد الانشطارية هو البلوتونيوم واليورانيوم.

2. مادة Fussionabel، هي المواد التي الذرات يمكن أن تنصهر لإطلاق الطاقة، والتي تم تضمينها في هذا النوع من المواد غير الديوتيريوم والتريتيوم.

3. المادة المصدر، هي المواد التي يتم استخدامها لزيادة السلاح النووي من خلال توفير موارد إضافية لانشطار جزيئات ذرية. المواد المدرجة هي التريتيوم، البولونيوم، البريليوم، والليثيوم-6 والهليوم 3.

وهكذا شرح موجز حول القنبلة النووية كما علمك من أقوى الأسلحة في العالم.


Jumat, 27 Januari 2017

BATU AKIK



 *ASAL-USUL BATU AKIK
Batuan akik atau yang dalam istilah gemstone digolongkan sebagai batuan setengah mulia memiliki kekerasan kurang dari 7 mohs.
 Batuan mulia merupakan anggota elite dari mineral alam. Disebut elite karena dari sekitar 3.000 jenis mineral di Bumi, hanya terdapat 150-200 yang bisa digolongkan jenis batu mulia.
 Indyo Pratomo, geolog dari Museum Geologi Bandung, mengatakan, sebagaimana mineral alam lainnya, pembentukan batu mulia terjadi melalui proses geologi sebagaimana batuan lainnya, misalnya melalui diferensiasi magma, metamorfosa, atau sedimentasi.
 Awalnya adalah aktivitas dapur magma di perut Bumi. Batuan cair bersuhu di atas 1.000 derajat celsius ini terus bergerak dalam selubung atau mantel Bumi. Di luar mantel ini adalah lapisan kerak Bumi, yang tersusun dari lempeng-lempeng yang terus bertumbukan dan menyisakan banyak retakan. Tekanan yang kuat dari dalam cenderung mendorong magma untuk mencari jalan keluar ke permukaan.
 Ketika cairan superpanas dan bertekanan tinggi ini mulai naik, cairan ini akan melarutkan berbagai batuan lain yang telah ada.Terjadilah proses pelarutan atau ubahan hidrotermal.
Intan merupakan batuan yang terbentuk di lapisan luar mantel Bumi, di kedalaman hingga 161 kilometer. Di kedalaman ini, tekanan mencapai 4 gpa dan suhu hingga lebih dari 1.350 derajat celsius.Tekanan yang luar biasa kuat dan suhu yang luar biasa panas kemudian mengubah mineral karbon anorganik di kerak Bumi (beda dengan karbon organik yang membentuk batubara) yang dilewati hidrotermal ini menjadi kristal intan.
Kebanyakan intan yang kita temukan sekarang merupakan hasil pembentukan proses jutaan-miliar tahun yang lalu. Erupsi magma yang sangat kuat membawa intan-intan tersebut ke permukaan, membentuk pipa kimberlite, penamaan kimberlite berasal dari penemuan pertama pipa tempat intan berada tersebut di daerah Kimberley, Afrika Selatan.
Intan merupakan bagian dari batuan mulia yang memiliki keistimewaan karena kekerasannya. Dalam jajaran batu mulia, skala kekerasan intan mencapai 10 mohs, disusul batuan safir dan rubi (mirah delima) yang mencapai 9 mohs, zamrud mencapai 7-8 mohs. Batuan akik atau yang dalam istilah gemstone digolongkan sebagai batuan setengah mulia memiliki kekerasan kurang dari 7 mohs.
Berbeda dengan intan, batuan akik terbentuk saat larutan hidrotermal semakin mendingin karena semakin dekat permukaan. Sambil berjalan ke atas, dia mengisi rekahan dan pori-pori batuan, dan bahkan mengisi fosil kayu sehingga membatu. "Batuan akik terbentuk oleh tudung-tudung silika atau larutan hidrotermal, yang tidak terlalu jauh dari permukaan. Temperaturnya kira-kira 300 derajat celsius," kata Sujatmiko, geolog yang juga Sekretaris Jenderal Masyarakat Batu Mulia Indonesia.
Menurut Sujatmiko, batuan akik ini bisa ditemui hampir di seluruh wilayah Indonesia. Dari 34 provinsi di Indonesia, hanya Jakarta tidak mempunyai batuan akik. Sementara intan, sejauh ini hanya ditemukan di Kalimantan. "Intan yang ditemukan di Kalimantan sejauh ini bukan berasal dari intinya, melainkan batuan intan yang dari sumber sekunder yang diendapkan atau dibawa oleh air dari tempat lain. Para geolog sudah sejak zaman Belanda memburunya, tetapi tidak ketemu sumber primernya seperti yang ditemukan di Kimberley," katanya.
Kekayaan batuan mulia dan setengah mulia ini karena aktivitas geologi Indonesia sejak jutaan tahun lalu. Sejauh ini, aktivitas geologis tertua di Indonesia yang terlacak terjadi sekitar 400 juta tahun lalu, ditemukan dari fosil sejenis kerang yang berada di puncak gunung-gunung di Papua. Ini menandai adanya aktivitas tektonik luar biasa sehingga bisa mengangkat dasar laut hingga membentuk pegunungan tertinggi di Indonesia.

*PROSES PEMBUATAN BATU AKIK
Sebelum anda melakukan proses pembuatan batu akik sebaiknya Anda mempersiapkan terlebih dahulu peralatan pembuatannya.berikut beberapa peralatan yang mendukung proses pembuatan batu akik:
 -DINAMO: Anda dapat menggunakan dinamo ukuran 250 Watt - 750 Watt . Silahkan anda pilih sendiri dinamo seperti apa yang cocok untuk keperluan anda . Setelah anda mendapatkan dinamo tersebut , anda dapat merakitnya untuk bisa memaksimalkan dua sisi as dinamo untuk dilekatkan batu asah . Sehingga satu dinamo bisa digunakan untuk 2 buah batu asah . Ukuran As jangan terlalu panjang , agar tidak terjadi getaran kuat saat mesin dihidupkan . Sesuaikan dengan keperluan anda
 -BATU ASAH: Batu asah yang bisa anda pakai umumnya berukuran 6 sampai 8 inchi . Pilih Batu Asah merek Norton , karena kualitasnya lebih baik daripada batu asah lainnya . Untuk melengkapinya , anda bisa juga menyediakan batu asah pisau , sebagai pelengkap jika sewaktu-waktu diperlukan .
 -GERINDA TANGAN: Biasanya alat ini digunakan untuk memotong keramik . Untuk harganya tidak terlalu mahal . Anda dapat membelinya untuk keperluan pembuatan batu akik . Alat ini bermanfaat nantinya untuk memotong dan membelah batu bongkahan yang akan dijadikan .
 -MEJA: Untuk hal ini sesuaikan dengan keperluan anda
 -KERTAS PASIR/AMPLAS: Persiapkan kertas pasir ukuran 1000 , 1200 , dan 1500 .
 -KAIN JEANS/KULIT,SERBUK INTAN,MINYAK ZAITUN,&LAIN-LAIN YANG MENDUKUNG PROSES PENGGILAPAN: Perlengkapan yang terakhir untuk tahap finishing yang berfungsi sebagai penggilap batu akik.
   
  Setelah bahan-bahan diatas sudah dipersiapkan,anda bisa memulai untuk merakit dinamo dan melekatkan batu asah.Jika hal tersebut sudah dipersiapkan,maka kini anda sudah bisa melakukan proses pembuatan batu akik . Beberapa teknik pembuatan batu akik sebenarnya didapatkan secara otodidak,namun kami akan memberikan serangkaian tahapan-tahapan yang dilakukan pengerajin dalam proses pembuatan batu akik.
Untuk membuat batu akik,anda harus sudah memiliki bahan atau bongkahan batu yang akan dijadikan . Silahkan anda memilih sisi mana yang baik untuk dijadikan dan sisi mana yang seharusnya dibuang . Berikut tahapan proses pembuatan batu akik:
 1-)Potong bongkahan batu akik menjadi kotak-kotak kecil. 
Sesuaikan ukurannya . Hal ini diperlukan agar dapat menghemat batu asah milik anda . Jika anda ingin membuat batu akik berukuran kecil , maka buatlah potongan kotak-kotak kecil . Membentuk potongan batu bongkahan menjadi kotak dapat mempermudah anda membentuk model batu akik . Jangan lupa untuk menyiram air secara terus menerus saat proses pemotongan untuk menghindari batu akik menjadi retak .
 2-)Lakukan teknik pengasahan. Hidupkan dinamo dan bentuk lah ukuran batu akik terlebih dahulu . Tahapan pertama ini , anda harus menyesuaikan batu akik dengan panjang dan lebar dari ikatan batu cincin . Jika anda masih pemula , anda dapat membuat coretan dan menggarisi batu akik untuk mengetahui ukurannya.Bentuk umum batu akik adalah bulat,oval,dan lonjong.Tetapi anda dapat menyesuaikannya.Pada tahap ini anda hanya membentuk pola dari batu akik dan belum mengasah bagian atasnya.Sebagai tambahan,anda dapat menggunakan selang infus untuk tetap memberikan air terhadap batu asah dan batu akik anda.Setelah pola batu akik didapatkan, kini asahlah bagian atasnya.Anda dapat mengasah sisinya terlebih dahulu untuk membentuk sebuah bulatan.Pada tahap ini kami sangat sulit menjelaskannya kepada anda.Karena pada umumnya , kreatifitas anda lah yang bermain.Setelah batu diasah dan sudah menunjukkan bentuk,maka timbang dan perhatikan baik-baik lapisan mana yang miring dan perlu anda asah kembali.
 3-)Menggosok batu akik dengan kertas pasir/amplas.
Pada tahap ini,anda dapat memperhatikan secara seksama bagian lapisan batu yang mengalami bendolan karena tidak rata dalam proses penggosokkannya.maka kertas pasir sangat bermanfaat untuk itu.
Ukuran kertas pasir 1000 bisa anda gunakan dalam tahapan pertama penggosokkan.
Setelah itu,anda dapat meningkatkan ukuran kertas pasir ke ukuran 1200. Pada ukuran 1200,lapisan batu akan terlihat halus namun belum mengkilap.Anda dapat menggunakan sendal bekas sebagai alasnya,untuk mempermudah proses penghalusan.
 4-)Tahap finising yaitu penggilapan.
Gunakan kain jeans untuk membantu pengkilapan batu akik.Tabur serbuk intan atau bubuk cat,pada kain tersebut jika anda tidak memiliki kulit. Setelah serbuk sudah ditabur,anda dapat menggunakan minyak zaitun atau minyak makan sebagai pembantunya.
    Proses ini dapat berubah-ubah sesuai keadaan dan situasi anda. Kebanyakan masalah terjadi pada proses pembentukan pola.Jika tidak teliti,maka batu akik anda akan hancur.
Selain itu,ada beberapa jenis batu akik yang sulit sekali menjadi mengkilap.Disini anda membutuhkan kesabaran yang tinggi untuk menggosok batu akik menjadi mengkilap.









English:
* ORIGIN AGATE
Agate rocks or in terms gemstone is classified as a semi-precious rocks have a hardness of less than 7 mohs.
 Precious rock is a member of the elite of natural minerals. Called elite because of the approximately 3,000 types of minerals on Earth, there are only 150-200 can be classified types of precious stones.
 Indyo Pratomo, a geologist from the Geological Museum of Bandung, said that, like other natural minerals, precious stones formation takes place through geological processes as well as other rocks, for example through the magma differentiation, metamorphosis, or sedimentation.
 First it was the activity of magma in the Earth. Molten rock temperatures above 1,000 degrees celsius is constantly engaged in a sheath or mantle. Outside of this coat is a layer of Earth's crust, which is made up of plates that continue to collide and leaves a lot of cracks. Strong pressure from within tends to push magma to find a way out to the surface.
 When the superheated liquid and high pressure begins to rise, the liquid will dissolve a variety of rock that has ada.Terjadilah dissolution process or hydrothermal alteration.
Diamond is a rock formed in the outer layer of the Earth's mantle, at a depth of up to 161 kilometers. At this depth, the pressure reaches 4 gpa and temperatures up to more than 1,350 degrees celsius.Tekanan unusually strong and unusually hot temperatures then converts inorganic carbon mineral in the Earth's crust (different from the organic carbon that forms coal) that passed this hydrothermal be crystal diamond.
Most diamonds we find today is the result of the formation process of the millions and billions of years ago. Very strong eruption magma carrying the diamonds to the surface, forming a kimberlite pipe, naming comes from the discovery kimberlite pipe where diamonds were first mentioned in the Kimberley, South Africa.
Diamonds are part of the precious rocks have privileges because of its hardness. In the ranks of precious stones, diamond hardness scale reached 10 mohs, followed by rock sapphire and ruby ​​(ruby), which reached 9 mohs, emerald reached 7-8 mohs. Agate rocks or in terms gemstone is classified as a semi-precious rocks have a hardness of less than 7 mohs.
In contrast to diamonds, agate rocks formed when hydrothermal solution cools as more and more near the surface. As he walked up, he fills cracks and pores of rocks, and even filling fossil wood so petrified. "The rocks agate is formed by silica caps or hydrothermal solution, which is not too far from the surface. The temperature of approximately 300 degrees Celsius," said Sujatmiko, a geologist who is also Secretary General of the Society Batu Mulia Indonesia.
According Sujatmiko, agate rock can be found in almost all parts of Indonesia. Of the 34 provinces in Indonesia, Jakarta only has no agate rock. While the diamond, so far only found in Borneo. "Diamonds are found in Borneo so far not from the point, but the rock diamonds from secondary sources is deposited or carried by water from other places. Geologists have been since the Dutch era after him, but did not meet primary source such as those found in Kimberley," he said.
Wealth precious and semi-precious rock is due to geological activity in Indonesia since millions of years ago. So far, the oldest geological activity in Indonesia were traced occurred about 400 million years ago, discovered a kind of fossil shells that were on top of the mountains in Papua. This indicates the tremendous tectonic activity that can lift the sea floor to form the highest mountain in Indonesia.

* PROCESS agate
Before you make the process of making agate should you prepare in advance equipment pembuatannya.berikut some equipment that supports the manufacturing process agate:
 -DINAMO: You can use a 250 Watt magneto - 750 Watt. Please select its own dynamo like what is suitable for your purposes. Once you get the dynamo, you can assemble in order to maximize the two sides as a dynamo to be attached to the grindstone. So that the dynamo can be used for two pieces of grindstones. As the size should not be too long, in order to avoid strong vibration when the machine is turned on. Customize with your needs
 -Stone Sharpen: sharpening stone that you can use is generally measuring 6 to 8 inches. Select Batu Asah Norton brand, because the quality is better than the other sharpening stone. To complete it, you can also provide a whetstone knife, as a complement at any time if necessary.
 -GERINDA HAND: Usually this tool is used to cut ceramic. For the price is not too expensive. You can buy it for the purposes of making agate. This tool is useful later for cutting and splitting the stone slab to be used.
 -MEJA: For this customize to your needs
 -Paper SAND / SANDPAPER: Prepare sand paper sizes 1000, 1200, and 1500.
 -Other JEANS / LEATHER POWDER TAN, OLIVE OIL, & OTHERS SUPPORT PROCESS shine: the latest equipment for the finishing stage that serves as the polishing agate.
   
  After the above materials have been prepared, you can begin to assemble and attach stone dynamo asah.Jika it is already prepared, so now you can make the process of making agate. Some of the techniques of making agate actually obtained by self-taught, but we'll give you a series of stages that do craftsmen in the manufacturing process of agate.
To make agate, you must already have the materials or boulders that will be used. Please choose which side is good to be used and which side should be discarded. The following stages of the manufacturing process agate:
 1-) Cut chunks of agate into small squares. 
Adjust the size. This is necessary in order to save the whetstone yours. If you want to make a small agate, then make the pieces into small squares. Forming a rock-cut chunks into the box can facilitate you establish a model of agate. Do not forget to flush the water continuously during the process of cutting to avoid agate cracking.
 2-) Perform grinding techniques. Turn dynamo was the size and shape agate beforehand. The first stage, you have to adjust agate with length and width of bonding stone ring. If you are a beginner, you can create streaks and outlined the agate to find common ukurannya.Bentuk agate is round, oval, and you can menyesuaikannya.Pada lonjong.Tetapi this stage you just set a pattern of agate and yet hone top. In addition, you can use a drip hose to keep providing water to the grindstone and agate anda.Setelah agate pattern is obtained, is now part atasnya.Anda sharpen can hone his side advance to form a bulatan.Pada this stage we are very difficult to explain it to anda.Karena in general, your creativity is what bermain.Setelah sharpened stones and already showing the shape, then weigh and take a good look which layers you need to hone his side and back.
 3-) Rubbing agate with sand paper / sandpaper.
At this stage, you may be paying close attention to parts of rock layers experienced bendolan for uneven in the process penggosokkannya.maka sand paper is very helpful for that.
1000 sand paper size you can use in the first stage penggosokkan.
After that, you can increase the size of sand paper to the size of 1200. In 1200 the size, the rock layers would look smooth but has not been able to use sandals mengkilap.Anda former as its base, to facilitate the process of refining.
 4-) The level of finishing is polishing.
Use fabric jeans to help pengkilapan akik.Tabur stone diamond powder or powder paint, on the cloth if you do not have skin. After the powder was sown, you can use olive oil or eating as a maid.
    This process can vary according to the circumstances and your situation. Most problems occur in the process of forming pola.Jika not careful, then you will be destroyed agate.
In addition, there are several types of agate are difficult to be mengkilap.Disini you need patience to rub agate becomes shiny.







العربية:
* القاحلة وشبه القاحلة، أصول باتو منظمة الصحة العالمية
الصخور أو من حيث الأحجار الكريمة العقيق تصنف على أنها شبه الثمينة الصخور لها صلابة أقل من 7 موس.
 الصخور الثمينة هي عضو في نخبة من المعادن الطبيعية. دعا النخبة بسبب ما يقرب من 3000 نوعا من المعادن على الأرض، لا يوجد سوى 150-200 أنواع يمكن تصنيفها من الأحجار الكريمة.
 وقال Indyo براتومو، وهو عالم جيولوجي من المتحف الجيولوجي باندونج ذلك، مثل المعادن الطبيعية الأخرى، وتشكيل الأحجار الكريمة يحدث خلال العمليات الجيولوجية فضلا عن غيرها من الصخور، على سبيل المثال من خلال الصهارة التمايز، والمسخ، أو الترسيب.
 البداية كان النشاط من المواد المنصهرة في الأرض. درجة حرارة الصخور المنصهرة فوق 1000 درجة مئوية وتشارك باستمرار في غمد أو عباءة. خارج هذا المعطف هو عبارة عن طبقة من القشرة الأرضية، والتي تتكون من لوحات التي لا تزال تصطدم ويترك الكثير من الشقوق. ضغوط قوية من داخل يميل إلى دفع الصهارة لايجاد وسيلة للخروج إلى السطح.
 عندما يبدأ ضغط السائل وارتفاع المسخن في الارتفاع، فإن السائل حل مجموعة متنوعة من الصخور التي لديها عملية حل ada.Terjadilah أو تغيير الهيدروحرارية.
الماس هو صخرة تشكلت في الطبقة الخارجية من عباءة الأرض، على عمق كيلومترات يصل إلى 161. في هذا العمق، والضغط يصل إلى 4 المعدل التراكمي ودرجات حرارة تصل إلى أكثر من 1350 درجة celsius.Tekanan درجات الحرارة قوية بشكل غير عادي وغير عادي الساخنة ثم تحويل المعدنية الكربون غير العضوي في القشرة الأرضية (مختلفة من الكربون العضوي الذي يشكل الفحم) التي مرت هذه المائية تكون الماس الكريستال.
معظم الماس نجد اليوم هو نتيجة لعملية تشكيل الملايين والمليارات من السنين. الصهارة اندلاع قوية جدا تحمل الماس إلى السطح، وتشكيل الأنابيب الكمبرليت، التسمية تأتي من أنابيب الكمبرلايت اكتشاف حيث ذكر لأول مرة الماس في كيمبرلي بجنوب أفريقيا.
الماس هي جزء من الصخور الثمينة لديه امتيازات بسبب صلابته. في صفوف من الأحجار الكريمة، وصلت مقياس صلابة الماس 10 موس، يليه الياقوت الصخور وروبي (روبي)، التي وصلت إلى 9 موس، بلغ الزمرد 7-8 موس. الصخور أو من حيث الأحجار الكريمة العقيق تصنف على أنها شبه الثمينة الصخور لها صلابة أقل من 7 موس.
وعلى النقيض من الماس والصخور العقيق شكلت عندما يبرد حل المائية والمزيد والمزيد بالقرب من السطح. بينما كان يسير فوق، وقال انه يملأ الشقوق ومسام الصخور، وحتى ملء الخشب الأحفوري تحجرت ذلك. "، ويتكون العقيق الصخور بواسطة القبعات السيليكا أو حل المائية، التي لا تبعد كثيرا عن السطح. درجة حرارة حوالي 300 درجة مئوية"، وقال Sujatmiko، جيولوجي وهو أيضا الأمين العام للجمعية باتو موليا إندونيسيا.
وفقا Sujatmiko، العقيق الصخور يمكن أن توجد في أجزاء كلها تقريبا من اندونيسيا. من المحافظات 34 في إندونيسيا، جاكرتا لا يوجد لديه الصخور العقيق فقط. في حين أن الماس، حتى الآن لا توجد إلا في بورنيو. "تم العثور على الماس في بورنيو حتى الآن ليس من وجهة، ولكن الماس الصخور من مصادر ثانوية وتودع أو تنفيذها عن طريق المياه من أماكن أخرى. كان الجيولوجيون منذ عهد الهولندي من بعده، لكنها لم تفي المصدر الرئيسي مثل تلك التي وجدت في كيمبرلي" قال.
ثروة الصخور الثمينة وشبه الثمينة ويرجع ذلك إلى النشاط الجيولوجي في اندونيسيا منذ ملايين السنين. وقعت حتى الآن، وقد تتبعت أقدم النشاط الجيولوجي في اندونيسيا منذ حوالي 400 مليون سنة، اكتشف نوع من قذائف الأحفوري التي كانت على أعلى الجبال في بابوا. وهذا يدل على النشاط التكتوني الهائل الذي يمكن رفع قاع البحر لتشكيل أعلى جبل في اندونيسيا.

* عملية العقيق
قبل إجراء عملية صنع العقيق يجب أن تعد في المعدات مسبقا pembuatannya.berikut بعض المعدات التي تدعم العقيق عملية التصنيع:
 -DINAMO: يمكنك استخدام 250 واط مغناطيسي - 750 واط. الرجاء تحديد دينامو الخاصة به مثل ما هو مناسب لأغراضك. بمجرد الحصول على دينامو، يمكنك تجميع من أجل تحقيق أقصى قدر من الجانبين كما دينامو لضمها إلى مجلخة. بحيث دينامو يمكن استخدامها لقطعتين من حجر الشحذ. ويبلغ حجم يجب أن لا تكون طويلة جدا، وذلك لتجنب اهتزاز قوي عند تشغيل الجهاز على. تخصيص ذوي الاحتياجات الخاصة بك
 -Stone شحذ: شحذ الحجر التي يمكنك استخدامها وقياس عموما 6-8 بوصة. اختر باتو Asah نورتون العلامة التجارية، وذلك لأن نوعية أفضل من الحجر شحذ الآخرين. لإنجاز ذلك، يمكنك أيضا توفير سكين يستون، كعنصر مكمل في أي وقت إذا لزم الأمر.
 -GERINDA HAND: وعادة ما يتم استخدام هذه الأداة لقطع السيراميك. بالنسبة للسعر ليست مكلفة للغاية. يمكنك شرائه لأغراض صنع العقيق. هذا هو أداة مفيدة في وقت لاحق لتقطيع وتقسيم اللوح الحجري لاستخدامها.
 -MEJA: لهذا تخصيصها لاحتياجاتك
 أحجام إعداد ورقة الرمل 1000، 1200، و 1500: -Paper الرمال / الصنفرة.
 جان -أخرى / جلد مسحوق تان، زيت الزيتون، وآخرون عن تأييدهم تألق العملية: أحدث المعدات للمرحلة النهائية التي هي بمثابة العقيق تلميع.
   
  بعد أن تم إعداد المواد المذكورة أعلاه، يمكنك أن تبدأ في تجميع وإرفاق دينامو حجر asah.Jika يتم إعداده بالفعل، وحتى الآن يمكنك جعل عملية صنع العقيق. بعض تقنيات صنع من العقيق التي تم الحصول عليها في الواقع من العصاميين، ولكن سوف نقدم لكم سلسلة من المراحل التي لا الحرفيين في عملية التصنيع من العقيق.
لجعل العقيق، يجب أن يكون لديك بالفعل المواد أو الصخور التي سيتم استخدامها. الرجاء اختيار الجانب الذي هو جيد لاستخدامها، ويجب التخلص من أي جانب. المراحل التالية من العقيق عملية التصنيع:
 قطع 1-) قص من العقيق إلى مربعات صغيرة. 
ضبط حجم. وهذا أمر ضروري من أجل حفظ لك يستون. إذا كنت تريد أن تجعل من العقيق صغيرة، ثم جعل القطع في مربعات صغيرة. يمكن تشكيل الصخر قطع في مربع تسهيل لك إنشاء نموذج من العقيق. لا تنسى أن تدفق المياه بشكل مستمر خلال عملية قطع لتجنب العقيق تكسير.
 2-) تنفيذ تقنيات الطحن. كان بدوره دينامو حجم وشكل العقيق مسبقا. المرحلة الأولى، لديك لضبط العقيق مع طول وعرض حلقة الربط الحجر. إذا كنت مبتدئا، يمكنك إنشاء الشرائط وأوجز العقيق للعثور على ukurannya.Bentuk شيوعا العقيق هو جولة، البيضاوي، ويمكنك menyesuaikannya.Pada lonjong.Tetapi هذه المرحلة كنت مجرد مجموعة نمط من العقيق وبعد صقل أعلى. وبالإضافة إلى ذلك، يمكنك استخدام خرطوم بالتنقيط للحفاظ على توفير المياه إلى الرحى والعقيق anda.Setelah العقيق نمط يتم الحصول عليها، هو الآن جزء atasnya.Anda شحذ يمكن صقل مسبقا جانبه لتشكيل bulatan.Pada هذه المرحلة نحن من الصعب جدا لشرح ذلك ل anda.Karena بشكل عام، والإبداع هو ما شحذ bermain.Setelah الحجارة وتظهر بالفعل الشكل، ثم وزن وإلقاء نظرة جيدة الطبقات التي تحتاج إلى صقل جانبه وظهره.
 3-) فرك العقيق مع الرمل ورقة / الصنفرة.
في هذه المرحلة، قد يكون دفع اهتمام وثيق لأجزاء من الطبقات الصخرية شهدت bendolan للتفاوت في عملية penggosokkannya.maka الرمل ورقة من المفيد جدا لذلك.
1000 حجم الرمل ورقة يمكنك استخدامها في أول penggosokkan المرحلة.
بعد ذلك، يمكنك زيادة حجم الرمل ورقة لحجم 1200. وفي 1200 حجم، فإن الطبقات الصخرية تبدو ناعمة ولكنها لم تكن قادرة على استخدام الصنادل mengkilap.Anda السابقة مقرا لها، لتسهيل عملية التكرير.
 4-) مستوى التشطيب وتلميع.
استخدام الجينز النسيج للمساعدة في pengkilapan مسحوق الماس حجر أو مسحوق الطلاء akik.Tabur، على القماش إذا لم يكن لديك الجلد. بعد أن زرعت مسحوق، يمكنك استخدام زيت الزيتون أو الأكل كخادمة.
    يمكن أن تختلف هذه العملية وفقا للظروف والوضع الخاص بك. وتحدث معظم مشاكل في عملية تشكيل pola.Jika غير دقيق، والعقيق وبعد ذلك سوف يتم تدميرها.
وبالإضافة إلى ذلك، هناك العديد من أنواع العقيق من الصعب أن تكون mengkilap.Disini تحتاج إلى صبر لفرك العقيق يصبح لامعة.

Sabtu, 17 Desember 2016

PEMBANGKIT LISTRIK TENAGA ASAM & GARAM / POWER PLANT ACID & SALT / السلطة مصنع حامض وملح


  Zat yang mengandung ASAM & GARAM dapat menghasilkan energi listrik apabila di beri logam yang berbeda (contoh:tembaga&seng).
 Hasil teknologi ini merupakan pengembangan hasil penelitian dari Alexander Volta. Dari penelitian volta disebutkan bahwa jika suatu deretan zat dimasukan ke larutan asam atau garam maka akan melepaskan muatan-muatan listrik.

*PEMBANGKIT LISTRIK DENGAN LARUTAN GARAM
Untuk dapat menghasilkan energi listrik dari larutan garam,pertama masukkan dua logam tembaga(cu) & seng(zn) kedalam larutan garam.tembaga(cu) sebagai kutub elektroda bermuatan positif(+) & seng(zn) sebagai kutub elektroda bermuatan negatif(-).
Berikut cara kerjanya: dua kutub elektrode, yaitu positif dan negatif. Di dalam air, natrium klorida akan terionisasi menjadi natrium (positif) dan klorida (negatif). Kutup positif elektrode akan menarik ion negatif klorida, sementara kutub negatif menarik ion positif natrium.

Perbedaan muatan dari aliran ion-ion inilah yang menciptakan arus listrik. Hasil akhir dari proses ini adalah air yang semula asin menjadi kurang asin. Saat elektrode ini telah jenuh dengan natrium dan klorida, ia tidak bisa menarik ion natrium dan klorida lagi. Agar bisa berfungsi kembali, elektrode ini cukup dicelupkan ke dalam air murni, maka garam dari elektrode ini akan terlepas kembali ke dalam air. Setelah itu elektrode tersebut bisa kembali dicelupkan ke dalam air garam yang baru untuk menghasilkan listrik lagi.
berikut cara kerja pembangkit listrik energi larutan garam.

*PEMBANGKIT LISTRIK DENGAN ZAT YANG MENGANDUNG ASAM/LARUTAN ASAM
 Agar bisa menghasilkan energi listrik dari zat yang mengandung asam Anda perlu dua logam;tembaga & seng.tembaga sebagai elektrode bermuatan positif(+) & seng sebagai elektrode bermuatan negatif(-).
masukkan kedua logam tersebut(tembaga&seng) kedalam larutan asam atau zat yang mengandung asam.
larutan atau zat yang mengandung asam ada banyak bentuk nya.anda bisa mendapatkannya pada buah-buahan seperti lemon,kedondong,asam,jeruk,mangga,&ll.anda juga bisa mendapatkannya pada pohon,oleh karena itu jika Anda menancapkan kedua elektrode(tembaga & seng) pada pohon maka akan terjadi aliran listrik pada kedua elektrode tersebut apabila saling di hubungkan antara kedua elektrode tersebut.
-Prinsip kerja:
Pada anode terjadi reaksi oksidasi dan pada katode terjadi reaksi reduksi. Arus elektron
mengalir dari katode ke anode. Arus listrik mengalir dari katode ke anode. Adanya
jembatan asam untuk menyetimbangkan ion-ion dalam larutan.Terjadi perubahan
energi: energi kimia menjadi energi listrik.
 Demikian adalah dasar-dasar pengetahuan untuk membangkitkan energi listrik dari GARAM & ASAM yang ramah lingkungan,semoga Berman fa'at untuk Anda semua.













English:
  Substances containing ACID & SALT can generate electrical energy when given the different metals (eg copper and zinc).
 The result of this technology is the development of research results of Alexander Volta. From research volta mentioned that if a series of substances entered into an acid solution or salt will release electric charges.

* POWER WITH SALT SOLUTION
To be able to generate electrical energy from the salt solution, first enter the two metals copper (cu) and zinc (zn) into a solution of garam.tembaga (cu) as a positively charged electrode pole (+) and zinc (zn) as polar electrode negative (- ).
Here's how it works: two polar electrode, the positive and negative. In the water, sodium chloride will be ionized into sodium (positive) and chloride (negatively). The positive pole electrode will attract negative chloride ions, while negative poles attract positive ions of sodium.

The difference in charge of the flow of ions that creates an electric current. The end result of this process is that the original salt water becomes less salty. When this electrode has been saturated with sodium and chloride, he could not draw sodium and chloride ions again. To be able to function again, this electrode is quite immersed in pure water, the salt of this electrode will be released back into the water. After that, the electrode can be re-dipped in salt water to generate electricity again recently.
The following workings energy power plants saline solution.

* POWER WITH SUBSTANCES THAT CONTAIN ACID / ACID SOLUTION
 In order to generate electrical energy from substances containing acids you need two metals; copper & seng.tembaga as a positively charged electrode (+) and zinc as electrode negative (-).
Please enter the two metals (copper and zinc) into a solution of acid or acidic substances.
solution or substance containing acid there are many forms nya.anda can get on fruits such as lemon, kedondong, acid, citrus, mango, & ll.anda can also get it on the tree, so if you plug both electrodes (copper & zinc ) on the tree, there will be electricity in the second electrode when each is connected between the two electrodes.
-Work principle:
At the anode the oxidation reaction occurs and the cathode reduction reaction occurs. electron flow
flow from the cathode to the anode. Electric current flows from the cathode to the anode. presence
bridge to balance the acid ions in larutan.Terjadi changes
energy: chemical energy into electrical energy.
 So are the foundations of knowledge to generate electrical energy from SALT & SOUR environmentally friendly, may Berman fa'at for you all.













العربية:

  المواد التي تحتوي على حمض والملح يمكن أن تولد طاقة كهربائية عندما تعطى المعادن المختلفة (مثل النحاس والزنك).
 ونتيجة لهذه التكنولوجيا هو تطوير نتائج البحوث ألكسندر فولتا. من أبحاث ذكر فولتا أنه إذا كان سلسلة من المواد دخلت الأسيد أو الملح سوف الافراج عن الشحنات الكهربائية.

* السلطة مع محلول ملحي
لتكون قادرة على توليد الطاقة الكهربائية من محلول الملح، أولا إدخال النحاس اثنين من المعادن (النحاس) والزنك (الزنك) في حل (متر مكعب) garam.tembaga كقطب موجب الشحنة القطب (+) والزنك (الزنك) بأنها سلبية القطب القطب (- ).
وهنا كيف يعمل: اثنان الكهربائي القطبي، والإيجابية والسلبية. في الماء، سيتم المتأينة كلوريد الصوديوم إلى الصوديوم (إيجابي) وكلوريد (سلبا). فإن القطب القطب الموجب جذب أيونات الكلوريد السالبة، بينما تستقطب أقطاب السلبية الأيونات الموجبة من الصوديوم.

الفرق المسؤول عن تدفق أيونات أن يخلق تيار كهربائي. النتيجة النهائية لهذه العملية هو أن المياه المالحة الأصلي يصبح أقل المالحة. عندما تشبعت هذا القطب مع الصوديوم وكلوريد، وقال انه لا يمكن رسم الصوديوم وكلوريد أيونات مرة أخرى. لتكون قادرة على العمل مرة أخرى، يتم مغمورة هذا القطب تماما في الماء النقي، سيتم الافراج عن الملح من هذا القطب إلى الماء مرة أخرى. بعد ذلك، القطب يمكن إعادة مغموسة في الماء المالح لتوليد الكهرباء مرة أخرى مؤخرا.
طريقة عمل حل طاقة محطات الطاقة المالحة التالية.

* السلطة مع المواد التي تحتوي على حمض / حمض الحل
 من أجل توليد الطاقة الكهربائية من المواد التي تحتوي على الأحماض تحتاج اثنين من المعادن، والنحاس وseng.tembaga باعتبارها القطب موجبة (+) والزنك والسلبية القطب (-).
الرجاء إدخال المعدنين (النحاس والزنك) في حل من المواد الحمضية أو الحمضية.
حل أو مادة تحتوي على حمض هناك العديد من أشكال nya.anda يمكن الحصول على الفواكه مثل الليمون، kedondong، وحامض، والحمضيات والمانجو، وll.anda يمكن أيضا الحصول على الشجرة، لذلك إذا قمت بتوصيل كل من الأقطاب الكهربائية (النحاس والزنك ) على الشجرة، سيكون هناك كهرباء في القطب الثاني عندما يتم توصيل كل بين القطبين.
العمل -Prinsip:
عند المصعد يحدث تفاعل الأكسدة ويحدث تفاعل اختزال الكاثود. تدفق الإلكترونات
تتدفق من القطب السالب إلى القطب الموجب. تدفق التيار الكهربائي من القطب السالب إلى القطب الموجب. وجود
جسر لتحقيق التوازن بين أيونات الحمض الموجود في التغييرات larutan.Terjadi
الطاقة: الطاقة الكيميائية إلى طاقة كهربائية.
 هكذا هي أسس المعرفة لتوليد الطاقة الكهربائية من الملح وصور لصديقة للبيئة، قد بيرمان fa'at لكم جميعا.

Jumat, 02 Desember 2016

cara mengetahui lama waktu pengisian & pemakaian BATERAI / how to determine the length of charging time and usage BATTERY / كيفية تحديد طول وقت شحن البطارية واستخدام


 *CARA MENGHITUNG LAMA WAKTU PENGISIAN BATERAI
 kinerja sebuah handphone atau laptop sangat dipengaruhi oleh daya tahan baterainya. Oleh karena itu banyak orang berusaha untuk menjaga baterai yang dimilikinya agar tidak cepat rusak, salah satunya adalah dengan memperhatikan lama waktu pengisian baterai.
Ketika membeli smartphone atau laptop baru tentu anda akan merasa kebingungan mengenai berapa lama waktu yang dibutuhkan untuk pengisian baterai. Terlebih lagi untuk smartphone yang memang dikenal mengkonsumsi banyak daya sehingga lama pengisian baterai harus diperhatikan. Hal ini perlu dilakukan untuk menjaga daya tahan baterai karena baterai yang di charge terlalu singkat atau terlalu lama dapat memberikan efek kerusakan baterai. Kalau terlalu singkat dapat membuat cell-cell baterai tidak terisi sepenuhnya, akibatnya lama-kalamaan kapasitas baterai berkurang sedangkan kalau terlalu lama dapat menyebabkan kerusakan dan kehamilan pada baterai.

Untuk mengetahui apakah baterai yang anda charge sudah terisi penuh atau belum sebenarnya bisa anda lakukan menggunakan multi meter. Bila angka tegangannya sudah mencapai angka maksimum berarti baterainya sudah penuh, untuk baterai hp 5V dan Laptop 19V tapi kadang berbeda sesuai pabrikan. Namun terkadang tidak semua orang memiliki multi meter, untuk itu anda bisa menggunakan cara menghitung lama waktu pengisian baterai berikut ini.
Perlu Diketahui:
1. Ah = Ampere hour(Amper/jam)
2. mAh = mili Ampere hour
3. 1 Ah = 1000 mAh

-Rumus Lama Waktu Pengisian Baterai: 
Kapasitas Baterai (Amper hour)=Kapasitas Charger (Ah) x Waktu Pengisian (h)
.
sehingga:
Lama waktu pengisian (h) = kapasitas baterai (Ah) / kapasitas charger (Ah)

-contoh soal:
1. Saya mempunyai smartphone dengan baterai 2460 mAh, pada charger tertera output 0.85 A. Berapa lama waktu yang dibutuhkan untuk pengisian baterai?

Jawab :
2460 mAh = 2.46 Ah
Lama waktu pengisian baterai = 2.46 Ah / 0.85 A = 2.89 h
 2.89 h x 60 menit= 173.4 menit / 2 jam lebih 53.4 menit.

2. Sebuah handphone memiliki baterai berkapasitas 1800 mAh. Pada charger tertulis output sebesar 900 mA. Berapa waktu yang dibutuhkan untuk pengisian baterai tersebut?

Jawab:
Lama waktu pengisian baterai = 1800 mAh / 900 mA = 2 h


*CARA MENGHITUNG LAMA WAKTU PEMAKAIAN BATERAI
Waktu pemakaian tergantung pada jumlah watt beban dan kapasitas baterai/accu.
perhatikan rumus perhitungan berikut:
perlu di ketahui,
-W(whatt)=V(volt)xA(amper)
-Lama waktu pemakaian batrai per jam atau hour(h)=daya batrai(Wh):daya beban(Wh)
-Contoh perhitungannya adalah sebagai berikut;
Kita mempunyai baterai/aki 12v 5Ampere,
Jadi 5 Ampere X 12v = 60 watt/jam, sedangkan pemakaiannya menggunakan lampu hemat energi 20 watt, jadi anda dapat memakainya dengan perhitungan sebagai berikut:
60watt : 20watt(lampu) = 3 jam.

demikian cara menghitung lama waktu pengisian & pengguna'an baterai,semoga bermanfa'at untuk anda.
 









 English:

 * HOW TO CALCULATE CHARGING TIME
 the performance of a mobile phone or laptop is strongly influenced by the durability of the batteries. Therefore, many people are trying to keep its batteries to prevent rapid deterioration, one of them is to consider the length of time the battery charging.
When buying a new smartphone or laptop you will undoubtedly feel confused about how long it takes to charge the battery. Moreover, for the smartphone which is known to consume a lot of power so the battery charging time must be considered. This needs to be done to maintain battery life for battery in charge is too short or too long can damage the battery effect. If it is too short can make cell-cell battery is not fully charged, resulting in long-kalamaan battery capacity decreases whereas if too long can cause damage and pregnancy on the battery.

To find out if you charge the battery is fully charged or not you can actually do use a multi-meter. If the number has reached maximum voltage means the battery is full, for laptop battery hp 5V and 19V but sometimes differ from the appropriate manufacturer. But sometimes, not all people have the multi meter, for that you can use the old way of calculating the following battery charging time.
Need to Know:
1. Ah = Ampere hour(Amper/jam)
2. mAh = mili Ampere hour
3. 1 Ah = 1000 mAh

Old -Rumus Battery Charge Time: 
Battery Capacity (ampere hour) = Capacity Charger (Ah) x Charging Time (h)
.
so:
Long charging time (h) = battery capacity (Ah) / charger capacity (Ah)

-problems example:
1. I have a smartphone with a 2460 mAh battery, the charger output contained 0.85 A. How long does it take to charge the battery?

Answer:
2460 mAh = 2.46 Ah
Long battery charging time = 2.46 Ah / 0.85 A = 2.89 h
 2.89 hx 60 minutes = 173.4 minutes / 2 hours and 53.4 minutes.

2. A mobile phone has a battery capacity of 1800 mAh. In a written charger output of 900 mA. How much time it takes to charge the battery?

Answer:
Long battery charging time = 1800 mAh / 900 mA = 2 h


* HOW TO CALCULATE TIME USE BATTERY
Usage time depending on the number of watts the load and capacity of the battery / batteries.
note the following calculation formula:
need to know,
-W(whatt)=V(volt)xA(amper)
-used Batrai usage time per hour or hour (h) = power batrai (Wh): load power (Wh)
-Contoh Calculation is as follows;
We have a battery / battery 12v 5Ampere,
So 5 Ampere X 12v = 60 watts / hour, while the use of energy saving lamps use 20 watts, so you can wear it with the following calculation:
60watt: 20watt (lights) = 3 hours.

thus calculate how long charging time and battery pengguna'an, hopefully bermanfa'at for you.









 العربية:

 * كيفية حساب وقت الشحن
 ويتأثر أداء الهاتف المحمول أو جهاز الكمبيوتر المحمول بقوة المتانة من البطاريات. لذلك، فإن العديد من الناس يحاولون ابقاء البطاريات لمنع التدهور السريع، واحد منهم هو النظر في المدة الزمنية للشحن البطارية.
عند شراء الهاتف الذكي الجديد أو الكمبيوتر المحمول سوف تشعر مما لا شك فيه الخلط حول كم من الوقت يستغرق لشحن البطارية. وعلاوة على ذلك، للهاتف الذكي الذي يعرف أن تستهلك الكثير من الطاقة حتى وقت شحن البطارية يجب أخذها بعين الاعتبار. هذا يحتاج إلى أن يتم الحفاظ على عمر البطارية للبطارية في التهمة هي قصيرة جدا أو طويلة جدا يمكن أن تتلف تأثير البطارية. إذا كانت قصيرة جدا يمكن أن تجعل بطارية خلية خلية لا مشحونة بالكامل، مما أدى إلى kalamaan طويلة انخفاض قدرة البطارية في حين إذا يمكن أن يسبب الضرر وقتا طويلا، والحمل على البطارية.

لمعرفة ما إذا كنت مسؤولا يتم شحن البطارية بالكامل أم لا يمكنك فعلا استخدام متعدد متر. إذا كان العدد قد وصل الى أقصى الجهد يعني امتلاء البطارية، بطارية كمبيوتر محمول لحصان 5V و19V ولكنها تختلف في بعض الأحيان من الشركة المصنعة المناسبة. لكن في بعض الأحيان، وليس كل الناس لديهم متر متعددة، لذلك يمكنك استخدام الطريقة القديمة لحساب البطارية بعد الشحن الوقت.
تحتاج إلى معرفته:
1. آه = أمبير ساعة (امبير / جام)
2. ماه = ميلى أمبير ساعة
3. 1 آه = 1000 ماه

قديم -Rumus شحن البطارية الوقت: 
قدرة البطارية (أمبير ساعة) = القدرة شاحن (آه) × شحن وقت (ح)
.
لذلك:
منذ فترة طويلة وفرض وقت (ح) = سعة البطارية (آه) / قدرة الشاحن (آه)

مسألة -contoh:
1. لدي الهاتف الذكي مع بطارية ماه 2460، تضمن انتاج شاحن 0.85 ألف كم من الوقت يستغرق لشحن البطارية؟

الإجابة:
2460 ماه = 2.46 آه
بطارية طويل وقت الشحن = 2.46 ه / 0.85 A = 2.89 ساعة
 2.89 HX 60 دقيقة = 173.4 دقيقة / 2 الساعات والدقائق 53.4.

2. الهاتف المحمول لديها قدرة البطارية 1800 مللي أمبير. في الناتج الشاحن خطية من 900 مللي أمبير. كم من الوقت يستغرق لشحن البطارية؟

الإجابة:
بطارية طويل وقت الشحن = 1800 ماه / 900 مللي أمبير = 2 ساعة


* كيفية حساب مدة استخدام البطارية
وقت استخدام اعتمادا على عدد من واط الحمل وقدرة البطارية / البطاريات.
ملاحظة الصيغة الحسابية التالية:
تحتاج إلى معرفته،
-W (هات) = V (فولت) XA (امبير)
-مستعملة Batrai وقت الاستخدام في ساعة أو ساعة (ح) = batrai الطاقة (واط): تحميل السلطة (واط)
حساب -Contoh هو على النحو التالي؛
لدينا بطارية / بطارية 12V 5Ampere،
حتى 5 أمبير X 12V = 60 واط / ساعة، في حين أن استخدام المصابيح الموفرة للطاقة استخدام 20 واط، لذلك يمكنك ارتدائه مع الحساب التالي:
60watt: 20watt (أضواء) = 3 ساعات.

وبالتالي احتساب المدة فرض الوقت وpengguna'an البطارية، ونأمل bermanfa'at بالنسبة لك.
 

Minggu, 27 November 2016

PENGETAHUAN TENTANG HELIKOPTER / KNOWLEDGE OF HELICOPTERS / المعرفة من طائرات الهليكوبتر



 Helikopter adalah jenis alat transportasi udara lain selain pesawat terbang. Helikopter berasal dari bahasa yunani, yaitu Helix (spiral) dan Pteron (sayap). Mulai dikenal pada tahun 1452-an oleh Leonardo da Vinci. Helikopter termasuk jenis pesawat. Ada 3 jenis pesawat yaitu :

   - Pesawat bersayap tetap (seperti pesawat terbang pada umumnya)
   - Pesawat bersayap putar (helikopter)
   - Pesawat hybrid (campuran dari cara kerja pesawat bersayap tetap dengan pesawat bersayap putar)

Dibandingkan dengan pesawat bersayap tetap, helikopter lebih kompleks dan lebih mahal untuk dibeli dan dioperasikan, lumayan lambat, terbatas dalam fasilitas bahan bakar, terbatas dalam beban dan ketinggian, memiliki jarak jelajah dekat dan muatan yang terbatas, itu adalah salahsatu dari beberapa kekurangannya.
Sedangkan keuntungannya adalah gerakannya, helikopter mampu terbang di tempat, mundur, lepas landas dan mendarat secara vertikal, dan dapat terbang ke lokasi mana pun, oleh karen itu, helikopter biasanya dipakai untuk tim penyelamat, karena helikopter dapat menjangkau daerah yang bermedan sulit.
Cara Kerja Helikopter
Helikopter dapat terbang dikarenakan gaya angkat yang dihasilkan dari perputaran baling-baling pada rotornya (mesin pemutar baling2 yang terdapat diatas helikopter). Baling2 tersebut mengalirkan aliran udara dari atas ke bawah. Aliran udara tersebut sangat deras sehingga mampu mengangkat helikopter yang berbobot belasan ton.
Jika pada pesawat terbang gaya angkat dihasilkan dari aliran udara yang melewati sayapnya, maka pada helikopter, fungsi sayap tersebut diganti dengan baling-baling yang berputar. Untuk mendapatkan gaya angkat, baling-baling rotor harus diarahkan pada posisi tertentu sehingga dapat membentuk sudut datang yang besar.
Penampang baling-baling lebih lebar di bagian atasnya, dengan bentuk seperti itu, udara yang melewati bagian atas baling-baling akan lebih cepat daripada di bagian bawah, tetapi tekanannya kecil, dan sebaliknya, udara yang mengalir di bagian bawah baling-baling memiliki kecepatan yang lebih kecil, tetapi tekanannya lebih besar, aliran udara yang terjadi pada tiap baling-baling menyebabkan terjadinya gaya angkat kecil, tetapi dengan perputaran baling-baling yang sangat cepat akan membentuk suatu permukaan yang rata dan udara yang menekannya ke atas menimbukan tekanan besar yang akhirnya menghasilkan gaya angkat yang besar pula.
Daya angkat (lift) yang ditimbulkannya tergantung pada sudut serang (angel of attack) dan kecepatan baling-baling saat berputar.

*ANTI TORQUE
Perputaran yang terjadi pada baling-baling akan menimbulkan tenaga putar (torque) pada badan helikopter, harus ada “penahan” agar badan helikopter tidak ikut berputar. Oleh karena itu haru ada Anti Torque yang berguna untuk menghilangkan atau menangkal efek putaran tersebut, gaya putarnya harus berlawanan dengan arah gaya putar baling-baling pada rotor utama. Jika gaya putar baling-baling utama menghasilkan gaya putar ke kanan, maka Anti Torque harus menghasilkan gaya ke kiri, begitu juga sebaliknya.
1. Tail Rotor
Anti Torque yang umum digunakan adalah dengan Tail Rotor, memberikan baling-baling pada ekor helikopter. Contoh penerapan Tail Rotor ini dapat dilihat pada helikopter model : Bell 412 , AS 335 Super Puma .
2. Sistem Tandem
Selain penggunaag-baling-baling pada ekor, ada juga yang menggunakan Sistem Tandem, dua buah rotor berukuran sama besar ditempatkan di bagian atas depan dan di bagian atas belakang badan helikopter. Keduanya simetris namun memiliki putaran yang berlawanan arah.  Maksudnya untuk saling meniadakan efek putaran yang ditimbulkan satu sama lain. Helikopter yang menggunakan sistem ini diantaranya : Boeing CH 47 Chinook , CH 46 Sea Knight .
3. Egg Beater
Model Anti Torque yang lain adalah Egg Beater ini, dua buah baling-baling yang sama besarnya diletakkan dalam satu poros, terpisah satu sama lain, yang satu diletakkan di atas rotor lainnya. Keduanya berputar berlawanan arah. Contoh penerapannnya ada pada helikopter  model : Ka-25 Kamov , Kaman HH-43 Huskie .
4. NOTAR (No Tail Rotor)
Selain ketiga cara diatas, ada juga teknik Anti Torque yang tanpa menggunakan baling-baling, metode ini dikenal dengan nama NOTAR (No Tail Rotor). Metode ini memanfaatkan semburan gas panas dari mesin utama yang disalurkan melalui tabung ekor, arah semburan gas berlawanan dengan arah putaran baling-baling. 

*RUMUS-RUMUS SEPUTAR HELIKOPTER
Untuk mengetahui rumus daya angkat baling-baling helikopter perhatikan soal & jawaban berikut:

-soal:
sebuah helikopter memiliki daya angkat P yang hanya bergantung pada berat beban total W (yaitu berat helikopter ditambah berat beban) yang diangkat, massa jenis udara (p) dan panjang baling-baling helikopter (l).
a. gunakan analisa dimensi untuk menentukan ketergantungan P pada W, p dan l.
b. jika daya yang dibutuhkan untuk mengangkat beban total W adalah P0, berapakah daya yang dibutuhkan untuk mengangkat beban total sebesar 2W?

-jawaban:
Helikopter memilki 4 buah sudu / baling-baling, panjang l, misal lebar baling-baling t , luas ke empat baling-baling A = 4.l.t m^2
Gaya angkat helikopter P :
F1 - F2 = ( P1 - P2 ) A,
dimana : P1 = tekanan udara dibawah baling-baling
P2 = tekanan udara diatas baling-baling
A = luas penampang baling-baling
Menurut huku Bernoulli :
P1 + 1/2 pgh1 + 1/2 pv1^2 = P2 + 1/2pgh2 + 1/2 pv2^2 , h1 = h2
P1 - P2 = 1/2 pv2^2 - 1/2 pv1^2, maka :
F1 - F2 = 1/2 p ( v2^2 - v1^2) . 4 . l . t
v2 = kecepatan udar diatas baling-baling, v1 = kecepatan udara di bawah baling-baling
Agar helikopter dapat naik degan beban W , maka gaya angkat P0 > W
2.p.(v2^2 - v1^2) .l.t > W

2. jika beban total yang diangkat = 2 W, maka gaya angkat harus lebih besar dari 2 W, maka luas penampang baling-baling nya 2 kali luas penampang semula A1 = 2 A, salah satu cara dengan menambah lebar t1 = 2 t --- > A1 = 2 . 4 .l .t = 8 l.t
Gaya angkat sekarang menjadi :
F1 - F2 = 1/2 p ( v2^2 - v1^2 ). A1
= 1/2 p( v2^2 - v1^2). 8 .l . t
= 4.p( v2^2 - v1^2).l.t > 2 W 









 English:



 The helicopter is a type of air transportation other than airplanes. The helicopter comes from the Greek, the Helix (spiral) and Pteron (wing). Became known in 1452's by Leonardo da Vinci. Helicopters including the type of aircraft. There are three types of aircraft, namely:

   - Airplane (like airplanes in general)
   - Rotary winged aircraft (helicopters)
   - Aircraft hybrid (mix of work at fixed winged aircraft with rotary winged aircraft)

Compared with fixed wing aircraft, helicopters are more complex and more expensive to purchase and operate, quite slow, limited in fuel facilities, limited in load and altitude, has a range near payload and limited, it is one of the main shortcomings of some.
While the upside is the movement, the helicopter is able to fly in space, retreat, take off and land vertically, and can fly to any location, by karen the helicopter usually used for rescue teams, because the helicopter can reach areas bermedan difficult.
How Helicopters Work
The helicopter can fly because the lift force generated from the rotation of the blades on the rotor (centrifuges baling2 that are above the helicopter). Baling2 the flow of air flow from top to bottom. The air flow is very heavy so as to lift the helicopter weighing dozens of tons.
If the aircraft lift is produced from the air passing over the wings, then on a helicopter, the function of the wing is replaced with a spinning propeller. To get a lift, rotor blades have to be directed at a particular position so that it can form a large angle of incidence.
Penampang propeller is wider at the top, with form like that, the air that passes through the top of the propeller will be quicker than at the bottom, but the pressure is small, and vice versa, the air flowing in the lower propeller speeds that smaller, but the pressure is greater, the air flow that occurs at each vane causes a small lift, but with a rotation propeller very quickly to form a flat surface and the air pushing up raises enormous pressure that eventually produces the greater the lift.
Power lift (elevator) thereof depending on the angle of attack (angel of attack) and speed while spinning propeller.

*ANTI TORQUE
Turnover happens to the propeller will cause rotary force (torque) on the body of the helicopter, there must be a "barrier" so that the helicopter body does not rotate. Therefore, there is Anti Torque emotion that is useful to eliminate or counteract the effects of the rotation, the force should be opposite the direction of rotation style rotary blades on the main rotor. If a swivel style main rotor produce force turn to the right, then the Anti-Torque must produce a force to the left, and vice versa.
1. Tail Rotor
Anti Torque commonly used is the Tail Rotor, giving the propeller on the tail of the helicopter. Examples of application of Tail Rotor can be seen on model helicopters: Bell 412, AS 335 Super Puma.
2. Tandem System
Besides penggunaag-propeller at the tail, there is also a Tandem System, two large rotors of the same size is placed on the top front and top rear body of the helicopter. Both symmetrical but has a rotation in the opposite direction. That is to negate each round effects caused each other. Helicopters that use this system include: Boeing Chinook CH 47, CH 46 Sea Knight.
3. Egg Beater
Model Anti Torque others are Egg Beater, the two propellers as much put in one axis, separated from each other, the one placed on the other rotor. Both rotating in opposite directions. Example of the implementation on model helicopters: Kamov Ka-25, Kaman HH-43 Huskie.
4. NOTAR (No Tail Rotor)
Besides the three ways above, there are also techniques Anti Torque without using propellers, this method is known as the NOTAR (No Tail Rotor). This method utilizes a blast of hot gases from the main engine which is channeled through the tail tube, gas bursts direction opposite to the direction of rotation of the propeller. 

* FORMULAS ON HELICOPTERS
To find formulas power lift helicopter blades note the following questions and answers:

-question:
a helicopter uplift P that depends only on the total weight W (ie heavy helicopters plus the weight of the load) is lifted, the density of air (p) and the length of the blades (l).
a. use dimensional analysis to determine the dependence of P on W, p and l.
b. if the power needed to lift the total load W is P0, what is the power required to lift a total load of 2W?

-jawaban:
Helicopters have 4 tablespoons / vane length l, ie the width of the blades t, spacious fourth vane A = 4.lt m ^ 2
The helicopter was Angkt:
F1 - F2 = ( P1 - P2 ) A,
where: P1 = pressure air under the propeller
P2 = air pressure above the propeller
A broad cross-section of the propeller
According to Bernoulli huku:
P1 + 1/2 pgh1 + 1/2 pv1^2 = P2 + 1/2pgh2 + 1/2 pv2^2 , h1 = h2
P1 - P2 = 1/2 pv2^2 - 1/2 pv1^2, maka :
F1 - F2 = 1/2 p ( v2^2 - v1^2) . 4 . l . t
v2 = speed of the propeller conditioning, v1 = velocity of air beneath the propeller
So that the helicopter can ascend degan load W, the lift force P0> W
2.p.(v2^2 - v1^2) .l.t > W

2. if the total load is lifted = 2 W, the lift must be greater than 2 W, the cross sectional area of ​​the propeller is 2 times the original cross-sectional area A1 = 2 A, one way to increase the width t1 = 2 t - -> A1 = 2. 4 .l .t = 8 lt
Lifting force now becomes:
F1 - F2 = 1/2 p ( v2^2 - v1^2 ). A1
= 1/2 p( v2^2 - v1^2). 8 .l . t
= 4.p( v2^2 - v1^2).l.t > 2 W 













 العربية:

 المروحية هو نوع من وسائل النقل الجوية الأخرى من الطائرات. المروحية يأتي من اليونانية، واللولب (دوامة) وPteron (الجناح). أصبح يعرف في ل1452 من قبل ليوناردو دا فينشي. مروحيات بما في ذلك النوع من الطائرات. هناك ثلاثة أنواع من الطائرات، وهي:

   - طائرة (مثل الطائرات بشكل عام)
   - الطائرات المجنحة الروتاري (طائرات الهليكوبتر)
   - الطائرات المختلطة (مزيج من العمل في الطائرات المجنحة الثابتة مع الطائرات المجنحة الدوارة)

مقارنة مع الطائرات ذات الأجنحة الثابتة وطائرات الهليكوبتر هي أكثر تعقيدا وأكثر تكلفة لشراء وتشغيل وبطيئة جدا، محدودة في مرافق الوقود، محدودة في الحمل والارتفاع، لديها مجموعة وبالقرب حمولة ومحدودة، وهو واحد من أوجه القصور الرئيسية لبعض.
في حين أن الاتجاه الصعودي هو الحركة، وطائرات الهليكوبتر هي قادرة على الطيران في الفضاء، تراجع، الإقلاع والهبوط عموديا، ويمكن أن تطير إلى أي مكان، من خلال كارين المروحية تستخدم عادة لفرق الإنقاذ، لأن هليكوبتر يمكن أن تصل إلى المناطق bermedan الصعبة.
كيف المروحيات العمل
المروحية يمكن أن تطير لأن قوة الرفع المتولدة من دوران الشفرات على الدوار (أجهزة الطرد المركزي baling2 التي هي فوق هليكوبتر). Baling2 تدفق تدفق الهواء من أعلى إلى أسفل. تدفق الهواء ثقيل جدا وذلك لرفع مروحية تزن عشرات الأطنان.
إذا أنتجت رفع الطائرة من مرور الهواء فوق الأجنحة، ثم على متن مروحية، يتم استبدال وظيفة الجناح مع المروحة الغزل. للحصول على رفع، ريش الدوار يجب أن تكون موجهة في موقف معين بحيث يمكن أن تشكل زاوية كبيرة من الإصابة.
Penampang المروحة أوسع في الجزء العلوي، مع شكل من هذا القبيل، فإن الهواء الذي يمر من خلال الجزء العلوي من المروحة يكون أسرع من عرضها في الأسفل، ولكن الضغط هو صغير، والعكس بالعكس، وتدفق الهواء في السرعات المروحة الدنيا التي أصغر، ولكن الضغط هو أكبر، وتدفق الهواء الذي يحدث في كل ريشة يؤدي إلى رفع الصغيرة، ولكن مع المروحة الدوران بسرعة جدا لتشكيل سطح مستو والهواء مما أدى إلى ارتفاع يرفع ضغط الهائل الذي ينتج في نهاية المطاف كلما المصعد.
رفع الطاقة (المصعد) اعتمادا منه على زاوية الهجوم (ملاك الهجوم) وسرعة بينما الغزل المروحة.

* عزم الدوران ANTI
دوران يحدث أن المروحة سوف يسبب القوة الدورانية (عزم) على جسم الطائرة، يجب أن يكون هناك "الحاجز" بحيث لا تدور على هيئة طائرة هليكوبتر. لذلك، هناك عاطفة عزم الدوران المضادة يمكن أن يكون مفيدا للقضاء أو مواجهة الآثار المترتبة على التناوب، ويجب أن تكون القوة المقابلة لاتجاه نمط دوران شفرات دوارة على الدوار الرئيسي. وإذا كان أسلوب قطب بدوره الرئيسية الدوار إنتاج القوة للحق، ثم مكافحة عزم الدوران يجب أن ينتج قوة إلى اليسار، والعكس بالعكس.
1. الذيل الدوار
مكافحة عزم الدوران التي تستخدم عادة هو الذيل الدوار، مما المروحة على ذيل الطائرة. ويمكن رؤية أمثلة على تطبيق الذيل الدوار على طائرات الهليكوبتر طراز: بيل 412، AS 335 سوبر بوما.
2. النظام جنبا إلى جنب
إلى جانب penggunaag المروحة في الذيل، وهناك أيضا نظام جنبا إلى جنب، وهما الدوارات كبيرة من نفس الحجم وتوضع على الجبهة أعلى وأعلى الجسم الخلفي من الطائرة. على حد سواء متناظرة ولكن لديه دوران في الاتجاه المعاكس. وهذا ينفي كل آثار الجولة تسببت بعضها البعض. المروحيات التي تستخدم هذا النظام ما يلي: بوينغ من طراز شينوك CH 47، CH 46 سي نايت.
3. البيض المضرب
نموذج مكافحة عزم الدوران البعض الآخر البيض المضرب، وهما مراوح وضع قدر في محور واحد، وفصلها عن بعضها البعض، واحدة وضعت على الدوار الآخرين. على حد سواء الدورية في اتجاهين متعاكسين. مثال على تنفيذ على طائرات الهليكوبتر طراز: كاموف كا 25، كامان HH-43 Huskie.
4. نوتار (لا الذيل الدوار)
إلى جانب الطرق الثلاث المذكورة أعلاه، هناك أيضا تقنيات مكافحة عزم الدوران من دون استخدام مراوح، ويعرف هذا الأسلوب باسم نوتار (لا الذيل الدوار). هذه الطريقة تستخدم انفجار الغازات الساخنة من المحرك الرئيسي الذي توجه من خلال أنبوب الذيل، ورشقات نارية الغاز باتجاه معاكس لاتجاه دوران المروحة. 

* الصيغ على HELICOPTERS
إلى إيجاد صيغ شفرات المروحية رفع الطاقة ملاحظة الأسئلة والأجوبة التالية:

-soal:
يتم رفع مروحية رفع P أن يعتمد فقط على مجموع W الوزن (طائرات الهليكوبتر أي الثقيلة بالإضافة إلى الوزن من الحمل)، وكثافة الهواء (ع) وطول ريش (ل).
أ. استخدام تحليل الأبعاد لتحديد تبعية P على W، ص ول.
ب. إذا كانت الطاقة اللازمة لرفع W الحمل الكلي هي P0، ما هي الطاقة المطلوبة لرفع الحمل الكلي لل2W؟

-jawaban:
طائرات هليكوبتر لديها 4 ملاعق / ريشة طول لتر، أي عرض من ريش ر، فسيحة الرابع ريشة A = 4.lt م ^ 2
وكانت الطائرة Angkt:
F1 - F2 = (P1 - P2) A،
حيث: P1 = ضغط الهواء تحت المروحة
P2 = ضغط الهواء فوق المروحة
قسم عريض من المروحة
وفقا لهوكو برنولي:
P1 + 02/01 + 02/01 pgh1 PV1 ^ 2 = P2 + 1 / 2pgh2 + 1/2 PV2 ^ 2، H1 = H2
P1 - P2 = 1/2 PV2 ^ 2 - 1/2 PV1 ^ 2، ماكا:
F1 - F2 = 1/2 ص (V2 ^ 2 - V1 ^ 2). 4. ل. ت
V2 = سرعة تكييف المروحة، V1 = سرعة الهواء تحت المروحة
بحيث يمكن أن طائرة هليكوبتر يصعد W تحميل ديجان، وP0 قوة الرفع> W
2.p. (V2 ^ 2 - V1 ^ 2) .lt> W

2. إذا رفع الحمل الكلي = 2 واط، يجب أن يكون رفع أكبر من 2 واط، ومساحة المقطع العرضي للالمروحة هو 2 مرات المساحة الأصلية مستعرضة A1 = 2 A، طريقة واحدة لزيادة عرض T1 = 2 ر - -> A1 = 2. 4 .L. تي = 8 لتر
قوة رفع يصبح الآن:
F1 - F2 = 1/2 ص (V2 ^ 2 - V1 ^ 2). A1
= 1/2 ص (V2 ^ 2 - V1 ^ 2). 8 .L. ت
= 4.p (V2 ^ 2 - V1 ^ 2) .lt> 2 W